Heavenly Burda 2012-09-123 wrap up!

Finally! The write up about my Dolce & Gabbana inspired embellished Burdastyle 2012-09-123 T-shirt. I was debating whether to hold off until I make a matching gold A-line skirt to do style shots with. But that’ll take too long and I’ll have forgotten all my construction details. So here goes…

The Pattern

I chose this because I wanted a T-Shirt sloper from Burda to gauge the fit of Burda knit tops. This one is perfect because if you join the front yoke to the front bodice, it’s a very basic T-shirt. The neckline is high enough to be jewel neckline that you’d expect of a sloper. The style is fitted enough. The fitted long sleeve again makes it a good baseline to gauge design variation.

The only thing I’m not sure about is the ease in the sleeve cap. Is that really necessary in a T-shirt made from stretchy material?

The Embellishment Inspiration

Style Shots & Mug Shots

Worn here with my Bird & Blossom Taffeta Skirt.
3-mug2-1F 3-mug2-4SR 3-mug2-3B2

4-bs201209123-style2-1 4-bs201209123-style2-9


4-bs201209123-style2-19 4-bs201209123-style3-1

4-bs201209123-style4-3 4-bs201209123-style4-5


This last one is with fabric for the matching gold A-line skirt
that I hope to make some day soon!

Fabric & Notions Used

Size Used

Size 34. Going by sizing chart instruction I would be a 38. Going by FFRP‘s instruction (chest/high-bust used as bust & choosing smaller size when in between) I’d be a 34.

Changes Made

Fitting changes = T-Shirt Block
  • Removed 3/4″ from front & back shoulder seam. (1/4″ of the front amount was done at the front yoke seam to preserve neckline curve. The armscye curve no longer match the original, but matches the curve adjustment below quite well.)
  • Sloping Shoulder Adjustment: removed additional 3/8″ from front & 3/4″ from back shoulders at armscye end. Lowered armscye 1/2″.
  • Wide Shoulder Adjustment: extended shoulder by 1/8″
  • Protruding Shoulder Blade /Rounded Upper Back Adjustments: extended back shoulder additional 1/4″. But in retrospect I think I’ve overdone these. The difference between front & back was a whopping 3/4″. Even with the stretchiness of the fabric, I got a little bit of puckering in the back shoulder. Oops.
  • Narrow Back Adjustment: removed 3/8″-1/2″ from back side seam.
  • Wide Arm Joint Adjustment: scooped out a bit from lower part of armscyes – 3/8″ front, 1/2″ back. Extended side seams at underarm out by 1/4″. (So back underarm end up with a net change of -1/8″.)
  • Adjusted side seam curve for shorter torso – curve back out to hip higher up than in original pattern. (This was basically copied from my previous Cowl-Neck T-Shirt Block based on McCall 6078.)
  • Lowered neckline at center back 3/8″.
  • Thin Arm Adjustment: removing 5/8″ from both sides, but tapered to 3/8″ at underarm to match Wide Arm Joint Adjustment on bodice.
  • Reduced the cap height by 1/2″ & adjusted the armscye curve. This pretty much removed all of the extra ease in the sleeve cap that I was complaining about further up.
  • Shortened the sleeve by 1″.
Design changes
  • Redrew the front yoke seam line so that it’s more slanted. I’ve removed quite a bit from the front shoulder, so I was a bit worried that a short almost horizontal yoke might emphasize my relatively broad shoulder.
  • Lowered the neckline 1/2″ all around.
  • Shorten hem 2-1/8″ in the back &  2-5/8 in the front for a more flattering & versatile length between high hip and full hip.
  • Replaced original facing & back neck opening with stretchy self-fabric tape facing – I want to say bias tape, but for most knit the stretchiest grain would be crossgrain rather than bias.
  • I used the two sides of the same fabric for the contrasting pieces, and matched the sleeves to the front yokes for a pseudo-raglan look on the front.

Verdict on the Instruction

I didn’t really follow the instruction as I’ve made a few changes. Plus I wanted to work out a more efficient way to sew up a T-shirt and try out some of the techniques mentioned in my Singer Sewing with Knits book.

Here’s how I constructed this one:

  • Before I start, I spray starched and ironed the fabric edges because this one LOOOOOOOOVEs to curl. I also spray starched the edges of the pieces after tracing out the patterns.
  • Next I embellished with fabric paint on the uncut pieces. Embellishment details in my earlier post.
  1. Sewing-wise, I started with the front yoke like in the pattern instruction, but pressed the seam allowance down (to de-emphasize a broad shoulder). I also sewed one shoulder seam at the same time (stablized with clear elastic & pressed towards the back), and overlocked the bodice and sleeves hem edges.
  2. Next is attaching neck tape facing to the neckline. Because the neckline hasn’t been sewn closed at the other shoulder seam, this is essentially a straight line rather than a circle.  So the short ends of the facing are lined up with either ends of the straight line – ie at front and back neck edges of the other shoulder seam. Facing is then understitched – seam allowance pressed towards facing, edge stitching on the facing close to neckline seam.
  3. The other shoulder seam is then stitched along with the short edges of the facing – effectively an extension of the shoulder seam on the neck side. The facing is then turned under twice – like typical hems – and stitched in place from the right side of the bodice.
  4. Sleeves are attached to the bodice next.
  5. Then sleeve and side seams as one continuous seam line.
  6. Finally sleeve and bodice hemming.

The usual Walking Foot and stretch stitch on sewing machine advice applies. This time I tried to do as much on Bernie the serger as possible as Saffy the sewing machine was still unwell at the time.

My serger skill is still a bit dodgy. I tried step 1 without pins or basting and the ends didn’t line up. Urgh. Thankfully I discovered how easy it is to unpick the 3-thread overlock seam. Hmmm, should I be worried about the strength of these seams? Anyway, I ended up hand-basting most seams. It was still quicker than unpicking seams multiple times. Hopefully with more practice my serging skill will pass Great British Sewing Bee judging standards! LOL

Would I sew it again / Would I recommend it to others

You bet! Or at least the T-Shirt block I derived from it. Every girl needs a TNT  T-Shirt pattern. This will be mine.

And I’m just drooling over the possible design variations this opens up!

I love how this T-shirt turned out. The neutral color goes well with so many other garments. And the shinier pseudo raglan sleeves reminds me of a suit of armor. Together with the Byzantine icon on the front and wings on the back it makes me feel like a foot soldier angel in God’s Army!

If you missed the previous posts, here’s the full thread of on my Burda 2012-09-123 adventure.

Close but no cigar (aka Heavenly Burda 2012-09-123 part 4)

I could have shown you my finished Burda 2012-09-123 T-shirt. Except I couldn’t finish it. Because I had to send Saffy the sewing machine back to the hospital.

She came back last Saturday. Her unbalanced tension seemed to have been fixed. But oh no, what’s this, Needle Down setting no longer works! And I can’t live without the Needle Down setting. I don’t know about you, but whatever I sew, the feed doesn’t stay straight. I constantly have to readjust the seam allowance to keep the sewing on the stitching line. Stopping with the needle down and presser foot slightly up has saved many a sewing project here. Plus there are all those corner turning where it comes in handy too. So back to the sewing machine repair shop Saffy went today.

I’ve actually sewn up most of the T-shirt already. I just need to finish the stretch hemming on Saffy’s return. In the meanwhile I can show you the embellishment step.

You may recall from Part 1 that my take on this T-shirt is inspired by Dolce & Gabbana’s Fall / Winter 2013 Byzantine Princess collection

Photo credit: Style.com

2-embellish-f-1smallSo for the front, I went back to my art history lesson and pulled up this mosaic image of Byzantine Empress Theodora (who turned out to be pretty cool, an early feminist you might say).

  • First I turned the image into grayscale and fiddled with the contrast in a photo editing software.
  • Then I printed it out, scaling to the size I need, and traced the key outlines onto tracing paper.
  • Next using dressmaking carbon and a blunt plastic needle (used for sewing up hand knitting) I transferred the design onto the fabric which had the pattern pieces already marked out.
  • Finally I used 3 different metallic paints to fill in the outlines: Jacquard Lumiere 561 Metallic Gold for white areas, Jacquard Lumiere 552 Bright Gold for mid-tone areas, and Jacquard Lumiere 565 Metallic Bronze for dark areas. Then heat set with iron set at temperature for my fabric.

For the back I used the Urban Threads wings embroidery design as planned. I was good though. Rather than ripping the artist off, I paid for easily affordable $1 hand embroidery design.

  • I printed this out directly on tracing paper with the design scaled down to 90%.
  • Then this was again transferred to the back fabric piece with dressmaking carbon and an old dried out ball-point pen.
  • The lines were then traced with the Jacquard Lumiere 561 Metallic Gold and Jacquard Lumiere 552 Bright Gold fabric paint, and again heat set with iron.

Those of you with eagle eyes (and mind) would have noticed I committed a big sin in the process: Marking the fabric with carbon paper like there’s no tomorrow. And worse, pressing over the said markings without washing them out first. Yeah, I’m a rebel. So sue me! ;-) Bred in NYC I like my Edginess. So I don’t mind if the carbon marking won’t wash out. If you’re of posher or more conservative taste, then do find some other way of transferring your markings and designs.

Anyway, I’m off to find some other project I can work on with just Bernie the overlocker and handsewing.

Stayed tune for the conclusion to this Heavenly T-shirt project coming in a week or two!

T-shirt Block. Again. (aka Burda 2012-09-123 part 1)

So while Saffy’s at the sewing machine hospital, I decided to tackle fitting for my upcoming projects…By way of a detour of course!

I needed to get to grip with Burda sizing. So I’m using Burda 2012-09-123 as a basic T-shirt block.

bs-2012-09-123_tech   fabric-gold-lycra-wrongfabric-gold-lycra-right

The plan was originally to use the muted gold lycra from Tissu Fabrics / Tia Knight as muslin. But I’ve since fallen in love with it. Especially after seeing Dolce & Gabbana’s Fall / Winter 2013 collection

Photo credit: Style.com

I loved Byzantine art when I took art history in college. All that old muted gold. Yum.

So the new plan is to make a proper version of Burda 2012-09-123. After much deliberation, I’ve decided to use the shinier side for the shoulder detail pieces and the darker, more muted side for rest of the body. I want to avoid my trunk from appearing thicker than it is.

Then play with the different tones of gold fabric paint to create mosaic design or Byzantine icon of some sort on the front. Hopefully one of the gold fabric paint will match the shade of the fabric’s shinier side. I might also add a line painting of something like this on the back!

(Machine embroidery design from Urban Threads.)

If I only had an embroidery machine…Though it still wouldn’t help on a stretch fabric like this!

Next up fitting alteration & muslining…